Surface Mount Quad Photodiode
OPR5925
Features: • Surface mountable • Closely matched responsivity • High temperature operation • Separate cathode connections Description: Each OPR5925 device is a four-element photodiode that is enclosed in a compact polyamide chip carrier and designed for a variety of encoder and control applications. The single chip construction ensures excellent matching and very tight dimensional tolerances between active areas. The custom opaque package shields the photodiodes from stray light and can withstand multiple exposures to the most demanding soldering conditions, while the wraparound gold-plated solder pads offer exceptional storage and wetting characteristics.
Each anode and cathode in the OPR5925 is bonded out separately, which enables external connection in any desired configuration to match the sensing circuit requirements.
See Application Bulletin 237 for handling instructions.
Applications:
• Encoder applications • Control applications
Warning: Front Window is pressure sensitive. Do not apply pressure or high vacuum to window.
Ordering Information
Part # of
Receiver Type
Number Elements
4 OPR5925 Photodiode Array
Responsivity Reverse Voltage Active Area
Packaging
(mA/mW) Min. Min. (mm2)
0.45 35 0.75 (each) Tube
OPR5925
Pin # 1
2 3 4
OPR5925
Anode 1 Cathode 1 N. C. / N.C. N. C. / N.C.
Pin # OPR5925 Pin # OPR5925
5 Cathode 2 9 N. C. / N.C. 6 Anode 2 10 N. C. / N.C. 7 Anode 3 11 Cathode 4 8 Cathode 3 12 Anode 4 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 15 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B 03/2012
Page 1 of 2
http://oneic.com/
Surface Mount Quad Photodiode OPR5925
Absolute Maximum Ratings (TA = 25° C unless otherwise noted)
Storage and Operating Temperature Reverse Breakdown Voltage
-55° C to +125° C
35 V / minute
Solder reflow time within 5°C of peak temperature is 20 to 40 seconds(1) 250° C Electrical Characteristics (TA = 25° C unless otherwise noted)
SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS R Responsivity VBR
Reverse Breakdown Voltage
.45 - - A/W Ee = 10 µW, λ = 0 nm, V = 0 V 35
-
-
V
IR= 100 µA
ID Reverse Dark Current CT Capacitance Lx W
Active Area (per diode)
- - 30 nA VR= 10 V - 10 - pf VR = 10 V -
0.75
-
mm2
(0.86 mm x 0.86 mm)
Notes:
(1) Solder time less than 5 seconds at temperature extreme.
Spectral Responsivity
100
Relative Response (%) 80
60
40
20
0
.4 .5 .6 .7 .8 .9 1.0 1.1
Wavelength (µm)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 03/2012
Page 2 of 2
OPTEK Technology Inc. — 15 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
http://oneic.com/
分销商库存信息:
OPTEK-TECHNOLOGYOPR5925